Mission Statement

Service with a smile! We strive to treat you as we would like to be treated.

Services

Service you can depend on...with a smile.

More Info

Request Quote

Free quotes provided upon request. Just contact us.

More Info

Brands We Support

We provide service on most brands.

More Info

Latest Articles

dirty vent

Keeping your vents clean makes your furnace happy

In a forced air furnace system air is circulated throughout the home by a network of tubing called air ducts. Heated or cooled air exits the air ducts into each room. This air is sometimes referred to as conditioned air–hot or cold. The unconditioned air (i.e. room temperature air or cold air) returns to the furnace via a separate network of air ducts called the cold air return.

At the air duct opening in the wall, ceiling, or floor; a vent cover, grill, or register plate generally covers the opening. Sometimes these covers will collect dirt or become blocked. This is mainly a concern with the return air vents as dust, lint, pet hair, etc. will collect on the fins as air is drawn into the air duct. vent cover

To maintain proper operation the furnace need a constant supply of return air available to the fan. If the air flow to the furnace is restricted then the efficiency is reduced and over time damage may occur.

The following are some tips to ensure good air flow:

1. The most common cause of restricted air into the furnace is a clogged air filter. Regular replacement or cleaning of your air filter is necessary. Remember, a clean air filter makes your furnace happy. For more information about maintaining your air filter, click  here.

2. Don’t block the return air vents with furniture, boxes, or other items that will prevent the air from flowing into the return air ducts. If you do have furniture in front of the return air duct then allow 4-6 inches of clearance.

3. In many homes the return air vents are centrally located in hallways or other main areas. Air is drawn from the various rooms to the central vent. When the doors to rooms are closed, air still needs to circulate back to the furnace. One simple solution is to leave a 1 inch gap at the bottom of the door.

4. Clean your vent covers periodically to remove the dust and lint which over time will build up and reduce the air flow to the furnace. We recommend using a brush attachment on your vacuum to try to keep the dirt out of the air duct. Some dirt will invariably enter the air duct during the cleaning process, so a good time to do this is just prior to replacing the air filter in the furnace.

 

Thank You,

David McGill
James McGill

Article written by Tim McGill, editor@Tree Branch Publishing.

images of electric room heaters

Risks of Improper Use of Electric Room Heaters

Electric room heaters, or space heaters, have gained popularity in recent years due to rising heating costs and clever marketing ads that claim incredible energy savings by using these heaters. The problem is that many of these heaters are not used as intended which reduces the savings or the electric circuit in the house is not properly rated which can be dangerous.

 

Proper Use

The intent of room heaters is to add extra heat for individual rooms that you wish to be at a higher temperature than other rooms in your house. For example, if you spend a larger portion of your time in the living or family room, then you may wish for the temperature to be comfortable in that room while allowing the rest of the house to be at a lower temperature to save energy. Another way to think of the intended use of these heaters is as portable zone control, allowing some rooms to be warmer.

The most common misuse of room heaters is using one or more heaters to heat the entire house, replacing a more efficient option of a gas furnace. Electric heat is more efficient at converting energy to heat than other energy sources, however, it is also more expensive. On average, electric heat will cost twice as much as natural gas. Contact us to discuss efficient heating systems to meet your needs.

Additionally, if the room heater is near the thermostat then the main furnace will not function properly. You may need to have the thermostat moved to a more suitable location if you utilize room heaters.

 

Power Consumption

Contrary to what is stated in the advertising, room heaters consume large amounts of power during use. A quick look at the label on the back or bottom of the unit will provide you with the rated power. Most heaters operate at 120 volts, 60 Hz, 1500 watts. The watts is the power consumed during use and what you are billed for by the utility company.

For information on how electrical energy is calculated, see article How to calculate electric energy cost of common household items.

I’m not saying that these companies are lying to you, but many of the statements are misleading. For example, one ad claims the heater consume the same or less power as a coffee pot. Good deal, right?, because coffee pots don’t use much energy. Wrong! Many coffee pots are rated at 1200 – 1500 watt, which is the same amount of power as the electric heater. However, we don’t think of a coffee pot using energy since it is generally only on for a few minutes each day; whereas the heater will be on for many hours of the day.

 

Electrical requirements

It is strongly recommend to have an electrician inspect the wiring and circuit protection in your house before buying or plugging in a room heater. The following are areas that David or James will check during an inspection.

1. Available dedicated circuit rated at 20 amps with proper size wiring and breaker (or fuse).

A 20 amp circuit may seem high but keep in mind that a single heater operating at 1500 watts has a current draw of 12.5 amps (1500watt/120volts). Wiring and breakers are sized based on current. It would seem that at 12.5 amps that the 20 amp circuit would still have 7.5 amps available. Unfortunately, that is not the case as breakers and fuses are rated at 80% capacity, which in this case is 16 amps. If any other devices are on the same circuit then overloading of the circuit is likely which will cause the breaker to trip or the fuse to blow.

2. Is the wiring the proper size throughout the entire circuit?

Sometimes different size wiring will be connected together on the same circuit and may cause a larger size breaker to be used where a smaller size is more appropriate (20amp breaker used instead of 15amp). The breaker rating should be sized based on the smallest wire size in the circuit. This is a particularly dangerous situation as the wire size for a portion of the circuit may be undersized and if the circuit amperage is too high for the wire size then the wire may become hot and cause a fire. Unfortunately, this can be difficult to detect in some installation if the wiring is not accessible.

3. Is the wiring in good condition?

Where possible to inspect, the wiring and insulation surrounding the wire will be check for possible damage or degradation.

4. Is the outlet in good condition?

The outlet body and cover plate will be inspected. If broken, then outlet or cover should be replaced. The fit of the plug into the outlet will also be check to ensure a snug fit. As cords are plugged in and unplugged many times over, the outlet socket wears out. A loose fitting outlet will cause the outlet or cord to overheat and damage the outlet and cord plug end. This is a potential fire hazard.

5. Is the outlet 3-prong?

Most heaters use a 3-prong plug which includes the ground connection to carry away harmful electricity in the event of an electrical short inside the heater. The outlet providing power to the heater must be 3-prong and should be grounded back to the service panel. If the outlet is the older 2-prong type then replacement with 3-prong type is required.

6. Do not use 2-prong adapters.

There are serious concerns with using an adapter to convert a 3-prong grounded cord to a 2-prong plugin. First, the heater will not be grounded, see item 5 above. Second, the adapters are not rated for the continuous current that the heaters use and will overheat. Best case the damage is limited to the cord or outlet, worst case is a potential fire.  Third, the two prong adapters do not hold the plug firmly into the outlet. Problems similar to a loose fitting outlet as described in item 4 are likely.

7. Check the cord plug end on used heaters to ensure the prongs and molded rubber are in good condition.

The cord end will be inspected to check for damage due to overheating or bent prongs. The length of the cord will be inspected to check for any nicks or cuts in the insulation. If damaged, then the cord should be replaced.

 

Manufacturers Warnings

Read manufacturer’s warnings and the provided owner’s manual. Additional information can typically be found on a tag on the cord.

When buying and installing an electric space heater, you should follow these general safety guidelines:

  • Electric heaters should be plugged directly into the wall outlet. No extension cords or power strips.
  • Do not use 2-prong outlet adapters.
  • Buy a unit with a tip-over safety switch, which automatically shuts off the heater if the unit is tipped over.
  • Do not route cords under carpet or rugs.
  • Maintain clear distances recommended by manufacturer.

 

If you have any question or concerns regarding use of room heaters please contact us.

 

Thank You,

David McGill
James McGill

 

Article written by Tim McGill, editor @ Tree Branch Publishing.

Enter your email address to subscribe to this blog and receive notifications of new posts by email.

Click for the BBB Business Review of this Heating & Air Conditioning in Centerville IA

Licensed Contractor for HVAC and Refrigeration

Licensed by Iowa Plumbing & Mechanical Systems Board as required by Iowa Code.

Member of Refrigeration Service Engineer Society (RSES)

Licensed Electrical Contractor

Licensed by Iowa Department of Public Health - State Fire Marshal Division.

David McGill - Master Electrician
James McGill - Master Electrician

Insured and Bonded

Bonded and Insured according to requirements of Iowa Plumbing & Mechanical Systems Board.

Insured per requirements of Iowa Department of Public Health - 2 million

We Buy Locally

When possible we like to support our local businesses.

True Value Hardware - Centerville
Lockridge - Centerville
Orscheln Farm & Home - Centerville
Crescent Electrical Supply - Ottumwa
3E - Ottumwa

Community Support

It is our privilege to assist with community projects and support local organizations.

- Member of First Baptist Church, David serves as board member
- 4H/FHA Sponsor
- David volunteers as Superintendent of Cow/Calf division for Appanoose County Fair
- James volunteers as Board Member for Appanoose County Fair
- Assists with installation of Christmas light around downtown area

Use of Information

Your privacy is very important to us. We will only use information you provide to us for activities relating to services provided by McGill Repair and Construction, LLC. We will never sell or distribute your information to others.